Top 10 typical forklift crashes ， forklift operation must take note of these issues ！.

Don't undervalue the forklift at work. If the operation is bad, there will be major crashes in minutes, and there are lots of crashes entailing forklifts.

Instance 1: The forklift cargo obstructed the motorist's sight, and the individual ahead can not be discovered, resulting in a moving crash.
Case 2: In order to maintain the balance of the forklift when raising heavy goods, the staff members utilized their body weight as the counterweight, which virtually caused casualties.
Instance 3: The size of the forklift freight exceeds the allowable size of the route and hangs on the roadside shelf, which virtually creates an crash.
Instance 4: Forklift is speeding and rolls over during a turn.
Case 5: The forklift chauffeur did not observe the pedestrian, and the pedestrian did not observe the forklift.
Instance 6: The forklift raises the workers illegally, the forklift driver does not put on the safety belt, the forklift lifter falls and the motorist is crushed when the forklift surrender.
Case 7: The forklift driver did not wear a safety belt and dropped from the lorry when it surrendered and was squashed.
Forklift procedure should take notice of these issues ：.

Start.
1. Before starting, observe the surroundings, and after validating that there are no barriers that prevent the security of driving, honk the horn initially and then begin.
2. For cars with hydraulic (air pressure) brakes, the brake hydraulic stress ( atmospheric pressure) gauge have to be risk-free prior to starting.
3. When the forklift starts with a load, the vehicle driver needs to first confirm that the load is stable and trusted.
4. The start has to be slow and consistent.

Driving.
1. When driving, the elevation in between the bottom end of the fork and the ground must be maintained 300mm-400mm, and the mast ought to be slanted backward. .
2. Do not lift the fork too expensive when driving. When getting in and leaving the task site or while driving, be careful that there will be no obstacles in the sky. When the load is traveling, the fork should not be raised too expensive, which will certainly influence the stability of the forklift. .
3. After discharging, the fork must be lowered to the normal driving position before driving. .
4. When turning, if there are pedestrians or vehicles nearby, the driving signal needs to be issued first. High-speed sharp turns are restricted. High-speed sharp turns will trigger the lorry to shed side security and tip over. .
5. When the forklift is downhill, it is strictly restricted to switch off the fire and slide, and it is forbidden to brake instantly while driving with loads unless there are special scenarios.
6. When the forklift is running, it must follow the traffic rules in the manufacturing facility and should maintain a certain safety and security distance from the car in front. .
7. When the forklift is running, the tons must be in the most affordable setting that does not hinder the driving, and the gantry ought to be properly tilted back. The lots will not be raised except when piling or loading. .
8. The elevation of the load have to not obstruct the driver's view. In unique circumstances, when the product impacts the forward vision, drive at a low speed when reversing.
9. It is forbidden to switch on the ramp, neither to drive throughout the ramp. .
10. The secure driving speed of the forklift in the factory location is 5 km/h, and it has to drive securely at a low speed when entering the manufacturing workshop location. .
11. When the forklift is lifted, lifted or driven, it is restricted for employees to depend on the fork to hold products and play a balancing duty. .
12. If problems are found, they will Electric Forklift Truck for Warehouse be repaired and reported in a prompt fashion, and they will certainly never operate with diseases or conceal them.

filling and dumping.
1. When fork-loading things, the distance between both forks need to be readjusted as needed to make the lots of both forks balanced and not manipulated, and one side of the item should protest the shelf. .
2. It is forbidden to collaborate with a solitary fork or use a fork top or draw. In unique conditions, security indication must be set up to remind bordering pedestrians. .
3. In the process of filling and unloading things, the forklift should be stopped with the brake. .
4. The rate of the car need to be slow and constant. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled objects and hurt people. .
5. When making use of a fork to fork the goods, the fork ought to be as deep as feasible under the lots, and it must be kept in mind that the fork tip must not touch various other products or things. The load must be stabilized with very little back tilt of the gantry so that the tons does not slide backwards. The mast can be slanted onward slightly when the tons is lowered to allow for very easy placement of the lots and extraction of the forks. .
6. It is restricted to fork items at high speed and ram hard objects with the fork head. .
7. When the forklift is working, it is forbidden for individuals to stand around the fork, so regarding stay clear of the collapse of the goods and hurt people. .
8. Overwhelming is prohibited, and it is restricted to make use of forks to raise personnel to take part in high-altitude operations to prevent high-altitude falling accidents. .
9. It is not allowed to utilize the brake inertia to slide, place, round or roll objects. .
10. It is not permitted to make use of forks to select, turn pallet discharge.

Leaving .
1. It is restricted to leave the forklift when the products on the fork are in the air. Before leaving the forklift, you need to discharge the goods or lower the fork framework.
2. Draw the parking brake handle to dead or dispirit the hand brake button.
3. The engine is turned off and the power is cut off. (Except for unique conditions, such as the vehicle driver does not leave the automobile's view and does not surpass 1 minute).
4. Get rid of the secret. .

Forklift Operation Precautions.
1. Prior to and after the forklift operation, the appearance should be inspected, and gas, lubricating oil and air conditioning water ought to be added.
2. Examine the security efficiency of starting, running and stopping.
3. Check whether the lights and horn signals are full and effective.
4. During the procedure of the forklift, examine whether the pressure and temperature level are normal.
5. After the forklift is running, the outside leakage ought to additionally be inspected and the seals need to be changed in time.

Forklift Safety Operation Specifications.
1. You must examine prior to leaving the vehicle;.
2. When you come across somebody before you throughout driving, you need to send out a signal at a distance of 5 m;.
3. The driving speed in the factory does not surpass 5 km/h;.
4. When driving, the low point of the cargo must be 0.3 m ~ 0.4 m above the ground;.
5. The transforming need to not be too sharp to prevent the propensity of " cost-free turning";.
6. Running up and down the slope must be slow and consistent, and no activating the slope is permitted.
7. Do not drive across the slope. When the gradient is above 10%, the vehicle must be driven backwards when declining;.
8. When the forklift employees bring the goods and move forward, if they encounter big or hefty products and most likely to the vehicle driver's line of sight, they need to take the reversing exercise
.
The "Eight Prohibitions" should be followed in the operation.
1. Single fork procedure is not permitted.
2. It is not permitted to raise the goods for long distance driving.
3. It is not permitted to get the goods by handing over the pallet with the fork.
4. It is not allowed to directly shovel chemicals, flammables and other unsafe chemicals with forks.
5. It is not permitted to use inertia force to get the goods.
6. It is not enabled to make use of braking force to exile round or easy-to-roll things.
7. It is not permitted to bring individuals to work on the pallet or fork, and it is strictly forbidden to stand under the fork after the fork is raised.
8. Do not drive side to side on inclines
.
Auto parking is not allowed under the following problems.
1. Curves, slim roads, railway crossings;.
2. Areas with a longitudinal slope greater than 5%.
3. When there is an obstacle on one side of the roadway, the contrary side of the section with the exact same length Electric Forklift Truck for Warehouse as the challenge need to be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844